The worst part of every bathroom is the grout. It stains. It cracks. Within a year it starts to look tired no matter how hard you scrub. Most bathroom renovations replace one tiled surface with another, and the grout problem starts over.
Microcement skips all of that. It’s a cement-based coating, only a few millimetres thick, that goes over your existing bathroom surfaces and cures into one continuous, fully waterproof skin. No tile grid. No grout. Nothing to scrub but the surface itself.
We install microcement bathrooms across Metro Vancouver. Here’s what that looks like in practice.
What a microcement bathroom actually is
Think of the concrete floors you see in modern cafes and galleries. Now imagine that same seamless look wrapped around your bathroom walls, your shower enclosure, and sometimes the floor, one surface flowing into the next.
Microcement bonds directly to what’s already there: old tile, drywall, concrete. The colour runs through the whole layer, so it never looks painted on. Every wall is one of a kind. The trowel work leaves a natural, subtle movement in the finish that you can’t get from anything in a can.
Once it’s sealed, the whole thing is waterproof. Water beads off it. Steam doesn’t bother it. That’s what makes it a bathroom material, not just a look.

Why bathrooms are the best room for it
No demolition. Your old tile stays where it is. We coat right over it. That means no days of jackhammers, no dust through the whole house, and no dumpster in the driveway. For a room you use every day, that alone is worth a lot.
No grout lines. This is the big one. Grout is the first thing to fail in any bathroom. It stains, it mildews, it cracks along the corners. A microcement bathroom has zero grout. Cleaning becomes wiping a smooth sealed surface, nothing more.
Small bathrooms feel bigger. A tiled wall chops the room into a grid. One continuous surface with no lines breaking it up makes even a small Vancouver bathroom feel calmer and more open.
Any surface, one flow. Walls, shower walls, floors, microcement wraps them in a single skin. No transitions, no trim lines, no caulk joints failing after two years.
How the process works
It isn’t a one-day job, and that’s by design. The difference between microcement that looks incredible for years and microcement that fails is all in the prep and the sealer, and we don’t rush either.
First comes preparation. Every surface gets properly prepped so the coating bonds for good. Then base layers go on to build the structure. Then finish layers, where the trowel work creates the look. And finally the sealer, which is what makes the whole thing waterproof.
A fireplace takes a couple of days; a bathroom takes longer, because the waterproofing stages get their time. Every step is done by our own crew, the same people who paint your walls and spray your ceilings. One team, one standard.
For a wider look at what this material can do, our main interior painting work covers every room, but honestly, the bathroom is where clients notice the biggest difference with microcement, because that’s the room where grout fails fastest.
What it costs to redo a bathroom the normal way
Here’s the comparison that matters. A standard bathroom retile means demolition, days of noise, waterproofing membrane, new tile, new grout, and within a year or two, that grout needs attention again.
Microcement is a premium finish. But when you compare the total disruption, the mess, the days without a working bathroom, and the ongoing grout maintenance, clients tell us the seamless option was the simpler call. No exact numbers here because every bathroom is different; send us a photo and we’ll tell you straight what yours would take.
If budget is your starting point, our Vancouver painting costs guide lays out how we price work in general.

Keeping it good for years
This is the easy part. A sealed microcement bathroom doesn’t need grout scrubbing, resealing every year, or special cleaners. Just a wipe.
The sealer is what does the heavy lifting, which is why we treat it as a stage, not a step. Get the sealing right and the surface stays waterproof and easy to clean for years. This is the same reason we take our time with prep on every surface we touch, like the ceiling and drywall prep work that has to happen before a good paint job. A finish is only as good as what’s underneath it.
Is your bathroom a good candidate?
Most are. Old tile that still has solid structure underneath is the ideal starting point. We coat over it and it’s gone.
We install microcement on fireplaces, walls, floors, and bathrooms in Vancouver, Burnaby, Surrey, Richmond, Coquitlam, and North Vancouver.
Send us a photo of your bathroom and we’ll tell you straight if it’s the right call, no pressure either way.
Call us at (236) 995-6777 and let’s talk about your space.

